Tekmar® 654 Snow Melting Control, Microprocessor Control, DIP Switch
MFG Part#654
DSG#31392
UPC#779655065404
Tekmar® 654 Snow Melting Control, Microprocessor Control, DIP Switch
MFG Part#654
DSG#31392
UPC#779655065404
- Control - Microprocessor control, this is not a safety (limit) control
- Programmable schedule, slab protection, scenes, snow melt zone tracking, snow melt zoning with priority, storm, supports both in slab and retrofit aerial sensors, tandem snow/ice detection
- EconoMelt, exercising, idling, manual override, manual start with timer
- tekmarNet® communication compatible
- Alert output, automatic snow/ice detection, away key, cold weather cut out
Brand
Tekmar
Control Type
Microprocessor
Dimensions
3-1/4 in W x 15/16 in D x 5 in H
Enclosure Type
NEMA Type 1
Material
PVC/Plastic
Switch Type
DIP
Brand
Tekmar
Dimensions
3-1/4 in W x 15/16 in D x 5 in H
Material
PVC/Plastic
Control Type
Microprocessor
Enclosure Type
NEMA Type 1
Switch Type
DIP
- The Snow Melting Control 654 is designed to operate electric or hydronic equipment to melt snow or ice from any surface including driveways, walkways, patios, business entrances, parking ramps, loading docks, hospital entrances, helipads or car wash bays. The surface temperature for snow melting is controlled automatically to reduce operating energy costs. The 654 has an automatic start and stop function when used with the Snow/Ice Sensor 090 or 094. Automatic start with a timed stop is available when used with the Snow Sensor 095. The 654 can operate a dedicated hydronic boiler or a mixing device. Isolation relays are required to operate line voltage pumps. Electric systems require a separate GFCI and electrical relay contactor.